On-Line Catalog
Power Tool Accessories

.
Return to top of page

Power Tool Foot Switch

Keep your hands free for work by using a convenient foot switch.  The grounded foot switch is designed for use with any power up to 5 AMP.  Most grinders, glass saws and came saws draw only 1 to 2 AMPS.

TL-318  Power Tool Foot Switch ......................................... 32.95

.
Return to top of page

Safety Glasses
A Must for Eye Protection

Heavy-duty plastic glasses have clear lenses with side shields for added safety.  Glasses are light weight and can be worn over prescription glasses.

TL-905  Safety Glasses ................................ each 2.95 / 6+ 2.49

.
Return to top of page

Grinder & Bandsaw Coolant

Coolant added to water reservoir adds life to your diamond grinding heads and your diamond bandsaw blades.  Also reduces heat that causes fractures while grinding or cutting.  Coolant mixes 30:1 with water to produce two gallons from 8 oz jar.

SP-904  Grinder & Bandsaw Coolant ..................................... 4.79

.
Return to top of page

Standard Face Shield

Magna Shield

Grinder Face Shield

Transparent 11" x 8-1/2" plastic shield is larger than most face shields.  Attaches easily to Inland and most other grinders.  Face shield is available as standard or MagnaShield, which magnifies the work area.

TL-315  Grinder Face Shield .............................................. 14.95

TL-383  MagnaShield Face Shield ...................................... 14.95

.
Return to top of page

Grinder Splash Guard

Shield fits around grinder to protect work area from spray.  Heavy plastic covered board is hinged to allow easy placement and cleans up easily.  Designed to fit any grinder.

TL-319  Grinder Splash Guard ............................................ 13.95

.
Return to top of page

1/4" Head

3/4" Head

1" Head

Diamond Grinder Heads

Inland diamond grinder heads fit all Inland grinders and can be used as replacements on Glastar (except Starlet/G5), Gemstone or other grinders with a 5/16" shaft size.  Available in Standard grit, Fine grit or Speed (heavy grit).  The standard grit grinder head is used most often.  The Fine Grit heads provide a much smoother edge, but grind much slower.  The Speed Bit heads grind nearly twice as fast as standard heads but leave a somewhat rougher edge.  Other specialty heads are also available below.

--- Item ---	Price	Qty / Order?
Standard Grinder Heads (approx 140 grit):
TL-310  1/4" Standard Grinder Head	17.95
TL-311  3/4" Standard Grinder Head	18.95
TL-312  1"   Standard Grinder Head	22.95
Fine Grit Grinder Heads (approx 200 grit):
TL-343  1/4" Fine Grit Grinder Head	19.95
TL-344  3/4" Fine Grit Grinder Head	22.95
TL-345  1"   Fine Grit Grinder Head	26.95
Speed Grinder Heads (approx 100 grit):
TL-320  1/4" Speed Grinder Head	19.95
TL-321  3/4" Speed Grinder Head	22.95
TL-322  1"   Speed Grinder Head	26.95

.
Return to top of page

Lamp Bit

Ripple Bit

Jewelry Bit

5" TwinSpin Disc

Specialty Grinder Heads

The Lamp Bit grinder head has 9 degree and 18 degree angled sides, which allows you to grind the edge of  lamp panels to fit properly.

The Ripple Bit grinder head is used to reduce the thickness of the edge of specialty glass to the standard 1/8" thickness.

A Jewelry Bit has a very thin grinding surface designed for creating a slot in fused glass, stones or jewels for making jewelry.  The bit is designed the create a slot to fit 16 or 18 guage wire.

Replacement 5" discs in three different grits are also available for the Inland Twin Spin grinder.

Inland diamond grinder heads fit all Inland grinders and can be used as replacements on Glastar (except Starlet/G5), Gemstone or other grinders with a 5/16" shaft size.  Regular grinder heads are also available, above.

--- Item ---	Price	Qty / Order?
TL-346  3/4" Lamp Bit Grinder Head	31.95
TL-347  3/4" Ripple Bit Grinder Head	28.95
TL-222  1" Jewelry Grinder Head	47.95
TL-314  5" Disc for Inland TwinSpin, Std                 (standard grit, approx 140 grit)                    Sorry - Out of Stock -                                  No Backorders	64.75
TL-328  5" Disc for Inland TwinSpin, Fine                 (fine grit, approx 200 grit)	67.75
TL-330  5" Disc Inland TwinSpin, X-Fine                 (super fine grit, approx 260 grit)	67.75

.
Return to top of page

Grinder Upper Work Surface
Simplifies Use of 1/4" Grinder Heads

"Second Story" work surface for Inland grinders allows better control when working with 1/4" bit.  Raises grinder surface to level of  bit.

TL-316  Inland Upper Work Surface .................................... 13.95

.
Return to top of page

Inland Replacement Work Surface
For Inland WizCG, Aero or Impulse grinders

Replacement top work surface for Inland WizCG, Aero or Impulse grinders.  A 3/4" 'Bit Sert' is also included with the work surface. 
Note: Will not work on the older style "Pop Top" models.

TL-381  Inland Replacement Work Surface .......................... 15.79

Go to top of Page

Return to Previous Section

Disc Conversion Kit
Converts Impulse or Wizard IV Grinders
Into Combination Router/Disc Grinder

Conversion kit changes the Impulse or Wizard IV router style grinder into a combination router/disc grinder with the addition of the Twin Spin dual-level work surface, 5" diamond disc, 22/30/45/90 degree mitre bars and coolant drip system.  The conversion kit results in a complete Twin Spin grinder with all the power, accessories and options of the factory Twin Spin model.  See also: Twin Spin Grinder <Click Here>

TL-306 Disc Conversion Kit (Impulse or Wizard IV) ................. 69.75

.
Return to top of page

Diamond Drill Bits

Full Page of Diamond Drill Bits for Glass, Tile & Stone

                     <Click Here>