On-Line Catalog
Chemicals

.
Return to top of page

Glastar Glasflux Soldering Flux

Water-soluble flux from Glastar does not corrode or discolor.  Use for lead, brass or zinc came or for copper foil.  Considered the best water-rinse product on the market.

SP-111  Glastar Glasflux, 4oz ............................................. 4.79

.
Return to top of page

Grinder & Bandsaw Coolant

Coolant added to water reservoir adds life to your diamond grinding heads and your diamond bandsaw blades.  Also reduces heat that causes fractures while grinding or cutting.  Coolant mixes 30:1 with water to produce two gallons from 8 oz jar.

SP-904  Grinder & Bandsaw Coolant .................................... 4.79

.
Return to top of page

Cutting Oil

Odorless, synthetic rinse-off  lubricant is specially formulated for self oiling cutters and for easy clean-up, 4 oz.  Standard oil based cutting oil is highly refined for error-free cutting, 4 oz.  AmeriGlas recommends the standard cutting oil - it is less expensive and appears to provide better lubrication to the cutter tip.

SP-901  Rinse Off Synthetic Cutting Oil, 4oz .......................... 4.95

Standard Cutting Oil - Recommended by AmeriGlas

SP-902  Standard Cutting Oil, 4oz .......................................... 4.39

.
Return to top of page

Patina
Available in Black or Copper

Novacan 'Super Black' patina produces a deep black aged look on both lead or solder.  Novacan 'Brite Copper' patina imparts a rich hue to solder joints.

SP-142  Black Patina, 8oz .................................................... 4.89

SP-140  Copper Patina, 8oz ................................................. 4.49

.
Return to top of page

Finishing Compound
Pure Carnauba Wax

Finishing compound is 100% pure carnauba wax.  Give your glass and solder or lead a deep luster while protecting your project.  Use on plain solder joint to retain a shiny finish - keeps the plain solder from oxidizing.

SP-145  Finishing Compound, 12oz .................................... 12.95

.
Return to top of page

Flux Remover

Flux remover easily cleans projects or work area of flux residue.  Water soluble and non-toxic.

SP-148  Flux Remover, 8oz ................................................. 5.79

.
Return to top of page

Whiting Powder

This non-abrasive powdered cleaning agent removes excess flux, oil, cement and other residue from stained glass projects.

SP-951  Whiting Powder, 1-1/2 Lb ......................................... 5.49

.
Return to top of page

Miracle Mud Cement - Two Part Mix
Available Black or Natural Color

Cement mixture strengthens and weather proofs camed projects.  New style of cement has powder separate from the liquid and can be mixed as needed.  Black Cement is normally used for projects using lead came.  Natural cement is light gray in color and is generally used on zinc or brass came.

SP-958  Black Cement, 21 oz .............................................. 13.89

SP-959  Natural Lt Gray Cement, 21 oz ................................. 13.89

.
Return to top of page

Flux / Chemical Brush

Brush is ideal for applying flux, patina, etching cream, and other chemicals.  Brush is 6" in length with brush width of 3/8"..

TL-903  Flux Brush ...................... each 0.29 / 12+ 0.23 / 36+ 0.19